Harga : Rp 0.00 Rp 0.00

Brand : IKA

Stok : Out Stock


HBC 10 Basic is a heated bath circulator heats up to a max. temperature of 250 °C. It has a high quality stainless steel bath with a volume of 7.5 – 10.5 liters. The large surface of the radiator allows for an optimum heat exchange and a gentle heating process of the medium. The superior insulation allows for a remarkably fast heat-up time. The easy to clean bath has a front drain valve for safe emptying. In order to drain the system, a hose is connected so there is no direct contact with the tempering fluid. With customer safety as our highest priority, the HBC 10 basic conforms to the highest safety classification III (FL) for use with flammable liquids according to DIN 12876.

  • Temperature range: 20 - 250 °C
  • Temperature accuracy: ± 0.02 K
  • Integrated cooling coil
  • Adjustable safety circuit
  • Powerful, speed-controlled pressure/suction pump
  • Push and turn buttons for an intuitive menu navigation
  • Large easy to read LED display for pump speed and temperature
  • Visual and acoustic safety warnings
  • USB / RS 232 interface for PC control and documentation using labworldsoft®, as well as updating the device software through our website


Appliance typeCirculation thermostat
Class designation acc. DIN 12876III
Identification according to DIN 12876FL
Heat output2500 W
Working temperatureroom temp. +10K @1000rpm - 250 °C
Operating temperature min. (with external cooling)-20 °C
Temperature displayyes
Temperature controlPT 100
Working temperature sensorPT 100
Safety temperature sensorPT1000
Working temperature displayLED
Safety temperature displayLED
Temperature stability DIN 128760.02 ±K
Connection for ext. temperature sensorPT 100
Display resolution0.1 K
Display for operation with ext. sensoryes
Set temperature resolution0.1 ±K
Warning function opticalyes
Warning function acousticyes
Warning function excess temperatureyes
Adjustable safety circuit0 - 260 °C
Sub-level protectionyes
Over-level protectionyes
Filling volume8 - 11 l
Pump typePressure- / suction pump
Pump capacity adjustableyes
Pump pressure max. (0 liters discharge flow)0.61 bar
Pressure pump (suction side) (0 liter flow)0.45 bar
Flow rate max. (0 bar back pressure)31 l/min
Pump connectionM16x1
Cooling coil connectionNW 8
Bath depth min.150 mm
Calibration optionyes
Technical data complies with the standardDIN 12876
Permissible ON time100 %
Dimensions (W x H x D)275 x 456 x 500 mm
Weight18 kg
Permissible ambient temperature5 - 40 °C
Permissible relative humidity80 %
Protection class according to DIN EN 60529IP 21
RS 232 interfaceyes
USB interfaceyes
Voltage230 / 100 - 115 V
Frequency50/60 Hz
Power input2650 W